Views:7 Author:Site Editor Publish Time: 2021-01-19 Origin:Site
What are the product characteristics and characteristics of the vertical injection molding machine? MH is a Vertical Injection Moulding Machine Manufacturers. Today, MH will introduce the characteristics of vertical injection molding machine to you.
The vertical injection molding machine is controlled by a microcomputer. The power system is driven by oil pressure. The plastic is heated by an electric heating ring in the barrel and sheared by the rotation of the barrel screw, and then pre-molded and melted into the cavity. After cooling, the mold is opened. The product can be obtained by the ejection action, and the vertical injection molding machine can perform manual and semi-automatic production.
Product features of vertical injection molding machine:
1. Vertical column-free clamping, horizontal injection, the mold is open on three sides, and the operation is more convenient and safe.
2. The injection pressure is large, controlled by a torque hydraulic motor, the screw torque is large, the pre-molding is the highest, and the system pressure is controlled by a proportional valve.
3. Multi-stage pressure output, pressure response is sensitive, precise and accurate.
4. Can use single, double slide, turntable system to improve production efficiency.
Features of vertical injection molding machine:
1. Small batch trial production, simple mold structure, low cost, and easy to load and unload.
2. It is easier to realize insert molding. Because the surface of the mold faces upwards, the inserts are easy to place and position. The lower template is fixed and the upper template is movable. The combination of the belt conveyor and the robot can easily realize fully automatic insert molding.
3. The weight of the mold is supported by the horizontal template to open and close up and down, and the forward tilt caused by the gravity of the mold like a horizontal machine will not occur, so that the template cannot be opened and closed, which is conducive to maintaining the precision of the machine and the mold.
4. The cavity of each plastic part can be removed by a simple manipulator, which is conducive to precision molding.
5. The general clamping device is surrounded by an open type, it is easy to configure various automatic devices, and it is suitable for automatic molding of complex and delicate products.
6. The belt-drawing conveyor device is relatively easy to realize the installation through the middle of the mold, which is convenient for realizing automatic molding production.
7. It can ensure the resin fluidity in the mold and the consistency of the mold temperature distribution.
8. Equipped with rotating table, movable table and inclined table, it is easy to realize insert molding and in-mold combination molding.
9. Having withstood the test of many earthquakes, the vertical injection molding machine has better seismic performance than mine because of its low center of gravity.